Trunk / Liftgate Hinge: Service and Repair
Rear Lid Hinge
• Removal and installation is described for right rear lid hinge. Removal and installation for the left-hand tailgate hinge is performed in the same manner.
Removing
- Remove rear lid - 1 - => [ Rear Lid ] Rear Lid
- Lower rear molded headliner
- Remove hex head nut - 3 - and rear lid hinge - 2 - from roof pillar.
Installing
• After installing rear lid - 1 -, retighten hex head nut - 3 - for rear lid hinge - 2 - to 24 Nm.
- Install rear lid hinge - 2 - and tighten hex head nut - 3 - to 24 Nm.
- Install rear lid - 1 - => [ Rear Lid ] Rear Lid
- At end of installation, retighten hex head nut - 3 - to 24 Nm.
- Install molded headliner