Link

Link

NOTE: Always replace guides with cable as a pair.

Removing

- Sunroof Glass Panel, Removing
- Removing installation unit.
- Remove drive motor for sunroof glass panel.
- Remove slotted guide rail







- Using a screwdriver, carefully disengage rain channel - 1 - in - direction of arrow - on both sides at bearing on guide retaining tabs - 2 - and remove rain channel.







- Disengage clip mechanism - arrows - of upper end piece - 1 - from lower end piece - 2 - using a screw driver and pull upper end piece off.







- Slide lower part of rear guide - 1 - in - direction of arrow - in guide rail - 3 - until the lock mechanism of guide catch - 2 - is released.
- Pull lower part of rear guide - 1 - and guide catch - 2 - together in - direction of arrow - out of guide rail - 3 -.

Installing

To install, perform the steps used for removal in reverse order.