Diagram 194/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Knock Sensors, Engine Speed (RPM) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations

G61 - Knock Sensor (KS) 1 Locations

G66 - Knock Sensor (KS) 2 Locations

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

T3v - 3-Pin Connector, on engine, front

T3w - 3-Pin Connector, on engine, front

T121 - 121-Pin Connector

(139) - Sensor Ground Connection (in Motronic Multiport Fuel Injection (MFI) wiring harness)

(220) - Sensor Ground Connection (in engine compartment wiring harness)

Previous Diagram 194/14 (Tracks 169-182)

Next Diagram 194/16 (Tracks 197-210)