Instrument Panel Center Vent With Climatronic
Instrument Panel Center Vent with Climatronic
Removing
- Switch off ignition.
- Pry sensor - 1 - out of indirect ventilation - 2 - using trim removal wedge 3409 .
- Disconnect wiring harness from sunlight photo sensor.
- Remove bolt - 3 - (1.5 Nm).
NOTE: To provide a better overview, components are shown removed in the following illustration.
- Insert two trim removal wedges 3409 as shown in seam between indirection ventilation - 1 - and vent - 2 -.
- Press metal clips - 3 - and - 4 - back with trim removal wedge 3409 and remove indirect ventilation upward out of mounts in vent - arrow -.
- Remove the two bolts - 1 - (1.5 Nm).
- Remove vent - 2 - in front area from mounts.
- Place two trim removal wedges 3409 in lower vent seam - arrows - and press vent upward out of instrument panel mounts.
- Press the corresponding catches and disconnect wiring harnesses from passenger airbag warning light switch and indicator light.
Installing
- Installation is reverse of removal.