Diagram 194/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster, Data Bus On Board Diagnostic Interface, Data Link Connector (DLC), Electronic Power Control (EPC) Warning Lamp, Multi-function Indicator (MFA)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J119 - Multi-function Indicator

J285 - Instrument Cluster Control Module

J519 - Vehicle Electrical System Control Module

J533 - Data Bus On Board Diagnostic Interface, in left footwell, near center console

K132 - Electronic Power Control (EPC) Warning Lamp

T16 - 16-Pin Connector, under instrument panel, left, Data Link Connector (DLC)

T20 - 20-Pin Connector

T36 - 36-Pin Connector

(376) - Ground Connection 11 (in main wiring harness)

(381) - Ground Connection 16 (in main wiring harness)

(655) - Ground Connection (on left headlamp) Overview of Ground Connections In Engine Compartment

(A76) - Diagnosis Wire K Connection (in instrument panel wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

_ . . _ - Only models with flexible Service Reminder Indicator (SRI)

Previous Diagram 194/20 (Tracks 253-266)

Next Diagram 194/22 (Tracks 281-294)