Tire Pressure Sensor Assembly Overview
Tire Pressure Sensor Assembly Overview
1 Tire Pressure Sensor
• Supplied complete as replacement part
• Removing and installing, refer to => [ Tire Pressure Sensor ] Service and Repair
• When battery is discharge, the entire ire pressure sensor must be replaced
• After using a wheel repair kit, the bore for the valve and opening of the pressure sensor must be wiped clean.
2 Valve Core
• Replace at every tire change
• Use only original manufacturer's valve insert, it has a special coating!
3 Sealing Washer
4 Seal
• Is slightly deformed when tightening the union nut - 6 -
5 Disc Wheel
• Mounting tires (wheels with tire pressure monitoring system), refer to => [ Tires, Wheels with Tire Pressure Monitoring System ] Tires, Wheels with Tire Pressure Monitoring System
• Mounting tires with emergency running characteristics, refer to => [ Run-Flat Tires ] Run-Flat Tires
6 Union Nut
• 8 Nm
7 Valve Cap
• Use only original valve caps from the repair set
• Do not use Comfort valve caps and metal caps