Fog Lamp

Fog Lamp

• Illustrations depict removal and installation at left fog light.

• Vehicles from 12.06, the form of the fog light cover cap has changed. The same procedure is used to remove and install the fog lamps.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Release cover cap - 1 - from locking devices in - direction of arrow -.






- Release cover cap - 1 - in - direction of arrow - from locking devices and remove cover cap - 1 -.






- Remove screws - 2 -.






- Remove the mounting bolt - 1 - above headlamp and remove washer - 2 -.






- Remove fog light housing from bumper and disconnect harness connector - arrow -.






Installation

Install in reverse order of removal. Note the following:

- Check headlamp for function.

- Check the fog lamp setting and adjust if necessary. Refer to Maintenance Procedures; Rep. Gr. 03.