Floor Console, Base Model

Floor Console, Base Model

Removing






- Remove the front plug (2) and clip (3).

- Slide the console (1) forward while lifting slightly to clear the rear load floor hook.

- Remove the floor console (1).

Installing






- Position the floor console (1) at a slight angle, front of console (4) slightly higher than the rear of the console.

- Slide the console (1) rearward into the underneath of the second row seat door assembly frame.

- Align the console until the anchor plug hole is centered on the winch hole.

- Reinstall the clip (3) first and then while pushing downward on the console with slight pressure, reinstall the cover plug (2).