Second Row Overhead Console, with Sunroof

Second Row Overhead Console, with Sunroof

Special tools, testers and auxiliary items required

• Trim Removal Wedge (RMCP101)

Removing






- Disconnect the negative battery cable.

- Using trim removal wedge (RMCP101) , gently pry down on the overhead console trim bezel (3) and pull down.

- Disconnect the electrical connectors to the lamps (1).

- Disconnect the electrical connector (2) to the rear heating, ventilation and air conditioning control head.

- Remove the overhead console trim bezel (3).






- Remove the screws (2) (two in front and two in back) from the overhead console trim bezel (3).

- Firmly grasp the overhead console (3) and pull downward in order to disengage the clips from the roof panel.

- Disconnect the DVD screen electrical connectors (1), if equipped.

- Remove the overhead console (3) from the vehicle.

Installing






- Position the overhead console over the retainer slots in the roof panel.

- If equipped with DVD screen, connect the electrical connectors (1).

- Firmly push on the overhead console (3) in order to seat the clips to the roof panel retainers.

- Install the screws (2) (two in front and two in back) securing the overhead console (3) to the roof panel.






- Position the trim bezel (3) over the slots in the roof panel.

- Connect the electrical connector (2) to the rear HVAC control head.

- Connect the electrical connectors to the lamps (1).

- Firmly snap the overhead console trim bezel (3) into place.

- Connect the negative battery cable.