Third Row Overhead Console, with Sunroof

Third Row Overhead Console, with Sunroof

Special tools, testers and auxiliary items required

• Trim Removal Wedge (RMCP101)

Removing






- Disconnect the negative battery cable.

- Using trim removal wedge (RMCP101) , gently pry down on the overhead console trim bezel (2) and pull down.

- Disconnect the electrical connectors to the lamps (1).

- Remove the trim bezel (2).






- Remove the screws (2) securing the rear of the overhead console (3).

- Grasp the overhead console (3) firmly and pull down on the front of the unit in order to disengage the front of the console.

- Disconnect the DVD screen electrical connectors (1), if equipped.

Installing






- Connect the DVD screed electrical connectors (1), if equipped.

- Position the overhead console (3) into place over the slots in the roof panel.

- Firmly snap the overhead console trim bezel (3) into place.

- Install the screws (2) securing the rear of the overhead console (3).






- Connect the electrical connectors (1) to the lamps.

- Position the overhead console trim bezel (2) over the slots and firmly snap into place.

- Connect the negative battery cable.