Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Rear Lid Seal
Rear Lid Seal
Rear lid seal is equipped at the factory with sealant, applied to body flange and then rolled on.
• When the seal is removed, the sealant is spread on the inner side of the seal and the sides are bent up slightly. If the seal is re-installed, the sealing performance and proper seating are no longer guaranteed.
• For this reason, replace every seal that is completely replaced with a "hammer-stroke seal".
• For partially removed seals, seal flanks must be pressed together before installation.