Selector Shaft Seal

Selector Shaft Seal

Special tools, testers and auxiliary items required

• Thrust Piece (T10174)

- Remove the multifunction transmission range switch. Refer to => [ Multifunction Transmission Range Switch (F125) ] Service and Repair

- Carefully pry out the selector shaft seal with a screwdriver. Be careful not to damage the selector shaft when doing this.

- Install the new seal all the way using the thrust piece (T10174). Be careful not to tilt the seal when installing it.






- Install and adjust the multifunction transmission range switch. Refer to => [ Multifunction Transmission Range Switch, Adjusting ] Adjustments