Display and Control Unit, through 05 November 2010

Display and Control Unit, through 05 November 2010

• The Climatronic Control Module (J255) and the front A/C display control head (E87) are one component that cannot be disassembled.

• If the front A/C display control head is being replaced with Climatronic control module then it is necessary, from 02 November 2009, to reset "A/C compressor, first break-in" using the Vehicle Diagnostic Tester under "Guided Functions". Refer to => [ Climatronic Components, Checking and Adjusting ] Climatronic Components, Checking and Adjusting.

Removal on the Passat from MY 06, on the Passat CC from MY 09 and on the CC from MY 10 is identical.

- Remove the instrument panel center trim.

- Remove the screws (1.5 Nm) - 2 - and the front A/C display control head with the Climatronic control module - 1 - from the instrument panel.






- Disconnect the connectors from the front A/C display control head.

Installing

Install in reverse order of removal.

If the front A/C display control head and the Climatronic control module were replaced, then the "A/C compressor first breaking-in" must be reset. Refer to => [ Climatronic Components, Checking and Adjusting ] Climatronic Components, Checking and Adjusting using the Vehicle Diagnostic Tester in Guided Functions then "replace Climatronic control module".