Vehicles with Start/Stop System General Information

Vehicles with Start/Stop System General Information

Safety Precautions When Working on Vehicles with Start/Stop System, refer to => [ Start/Stop System Safety Precautions ] Start/Stop System Safety Precautions.

If the vehicle has a start-stop system, perform the following termination conditions to deactivate the start-stop function:

• Use the Start/Stop button to switch off the Start/Stop System.

• The battery state of charge does not make it possible to start the engine again (start voltage prediction).

• The defrost function is active.

• The heated front windshield is active.

• The selected temperature deviates more than 8 °C from the actual temperature inside the vehicle.

• The engine RPM exceeds 1,200 RPM.

• The generator (C) is faulty, for example, the ribbed belt is torn.

• The coolant temperature is not in the specified range of 25 °C to 100 °C.

• Increasing the blower speed by more than 4 steps.

Further information:

• For more information, refer to 426 Start/Stop System 2009.