Engine Assembly - Fastener Tightening Specifications

Fastener Tightening Specifications






Engine Mount





1. = 40 Nm + an additional 90° (1/4) turn (Note 1)

2. = 20 Nm + an additional 90° (1/4) turn (Note 1)

3. = 60 Nm + an additional 90° (1/4) turn (Note 1)


Transmission Mount





A = 40 Nm + an additional 90° (1/4) turn (Note 1)

B = 60 Nm + an additional 90° (1/4) turn (Note 1)

Pendulum Support





• First secure the pendulum support to the transmission and then to the subframe.

A Strength category 8.8: = 40 Nm + an additional 90° (1/4) (Note 1)
A Strength category 10.9: = 50 Nm + an additional 90° (1/4) (Note 1)
B = 100 Nm + an additional 90° (1/4) turn (Note 1)

Removing: First remove the bolt - B -, then the bolts - A -.

Installing: First install the bolts - A -, then the bolt - B -.

• (Note 1) Always replace