Air Injection: Service and Repair

Secondary Air Injection System Component Overview






1 Gasket

• Always replace.

2 Secondary Air Injection Solenoid Valve (N112)

• Removing and installing, refer to => [ Secondary Air Injection Solenoid Valve (N112) ] Service and Repair.

3 Bolt

• 9 Nm

4 Secondary Air Injection Sensor 1 (G609)

5 O-ring

• No replacement part available.

• If damaged, replace the secondary air injection sensor 1.

6 to the Upper Air Filter Housing

7 Connecting Pipe

• Make sure it is secure.

8 Routing Aid for the Air Filter Housing Drain Tube

9 Nut

• 9 Nm

10 Bracket

• For the Secondary Air Injection (AIR) pump motor.

11 Nut

• 25 Nm

12 Secondary Air Injection (AIR) Pump Motor (V101)

• Removing and installing, refer to => [ Secondary Air Injection Pump Motor (V101) ] Service and Repair.