Replacing Data Bus On Board Diagnostic Interface (J533)

Replacing Data Bus On Board Diagnostic Interface (J533)

Special tools, testers and auxiliary items required

• Vehicle diagnosis, testing and information system (VAS 5051B)

If the data bus on board diagnostic interface is to be replaced, the work procedure must be performed to read out the codes stored in the module.

- Connect the (VAS 5051B).

- In the (VAS 5051B) , select the "Guided fault finding" operating mode.

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Data Bus On Board Diagnostic Interface

• Functions of Data Bus On Board Diagnostic Interface

• Replace Data Bus On Board Diagnostic Interface