Anti-Rodent System

Anti-Rodent System

Removing

• The wheel and the suspension strut are not shown in the illustration.

- Remove the bolts - 1 -.






- Remove the components from the vehicle.

- Remove the screws - 2 - from the protection - 1 -.






• The protection may look different on different engine types.

Installation

- Install the front protection. Pay attention to the guide - arrow -.

- Tighten the screws - 1 - to 2 Nm.






- Tighten the screws - 2 - on the protection - 1 - to 25 Nm.