6-Pin Universal Oxygen Sensor

6-Pin Universal Oxygen Sensor

• Use the faulty sensor as a guide for installing all of the accompanying attachments, cable ties or marking bands.

• Do not crimp or cut the wires otherwise the functionality of the heated oxygen sensor (HO2S) will be diminished.

- Remove the old heated oxygen sensor (HO2S).

- Lay both of the oxygen sensor next to each other so the sensor housings are the same level.






- Tie the excess length of the sensor (approximately 2 to 10 inches (50 to 250 mm)) back so it is the same length as the faulty sensor and secure it with cable ties - 1 -.






- Install the new oxygen sensor in the vehicle.