Driver Entry Lamp In Exterior Rearview Mirror (W52)/Front Passenger Entry Lamp In Exterior Rearview Mirror (W53)

Driver Entry Lamp In Exterior Rearview Mirror (W52)/Front Passenger Entry Lamp In Exterior Rearview Mirror (W53)

Driver entry lamp in exterior rearview mirror / Front passenger entry lamp in exterior rearview mirror are integrated in the mirror housing.

It is not necessary to remove the exterior mirror in order to remove and install the driver entry lamp in exterior rearview mirror/front passenger entry lamp in exterior rearview mirror.

The driver entry lamp in exterior rearview mirror / front passenger entry lamp in exterior rearview mirror are removed and installed the same way, so the description is only given for one side.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Fold the exterior mirror - 1 - forward in - direction of arrow -.






- Remove bolt - 1 -.






- Remove the driver entry lamp in exterior rearview mirror from the exterior mirror in - direction of arrow -.






- Remove the socket - 2 - from the driver entry lamp in exterior rearview mirror housing - 1 - in - direction of arrow -.






Replacing a Bulb

- Pull the bulb - 1 - out of the socket - 2 - in - direction of arrow -.






Bulb: plug-in bulb 12 V/6 W

Installation


• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Installation is performed in the reverse order of removal. Note the following:

- After installation, perform a function check of the exterior rearview mirror.