Vehicle Electrical System Control Module (J519) (Low)

Vehicle Electrical System Control Module (J519) (Low)

If the vehicle electrical system control module (J519) is to be replaced, the work procedure => [ Vehicle Electrical System Control Module (J519), Replace ] Vehicle Electrical System Control Module (J519), Replace must always be performed to read out the codes stored within it.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the left instrument panel cover on the driver side. Refer to Storage Compartments, Covers and Trim in.

- Loosen the locking mechanism - 3 - and press the vehicle electrical system control module - 2 - downward in the - direction of the arrow -.






- Disconnect the connectors - 1 -.

Installing

Install in reverse order.





















Edition 05032012FB