Glove Compartment: Service and Repair

Glove Compartment

Removing

- Switch off the ignition.

- Remove right side instrument panel cover. Refer to => [ Instrument Panel Side Covers ] Instrument Panel Side Covers

- Remove the glove compartment lamp (W6).

- Remove the screws - 1 -, - 2 -, - 3 -, - 4 - and - 5 -(1.5 Nm).

• When installing, the bolts must be installed in sequence - 5 -, - 4 -, - 3 -, - 2 - and - 1 - (1.5 Nm).

- Loosen glove compartment from instrument panel.

- Disconnect the harness connector from the glove compartment lamp switch (E26).

- On vehicles equipped with a right footwell light (W10) , disconnect the harness connector from the lamp.

- In vehicles with glove compartment cooling, disconnect A/C channel from glove compartment.






Installing

- Install in reverse order of removal.