Steering Column Switch Mount, Valeo

Steering Column Switch Mount, Valeo

Special tools, testers and auxiliary items required

• Angled hand drill

• Torque Wrench (V.A.G 1410)

Follow the specified sequence when removing and installing steering column switch components. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

• The shear bolts - 1 - on the electronic steering column lock control module (J764) must be drilled out in order to remove the steering column switch mount - 2 -. New shear bolts will be needed later for installing. Refer to Electronic Parts Catalog (ETKA).






• Before drilling out shear bolts, always ensure all components secured to mount are removed beforehand.

• By drilling out, drill shavings can reach the neighboring components, which can lead to damage and / or malfunctions!

• When removing the steering column switch components, observe the specified sequence. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

When disconnecting and connecting the battery, always perform the work procedure as described in the repair information. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

Removing

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

- Remove the components on the mount in the specified sequence. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

Once all components secured to the mount have been removed, the mount can be removed:

- Drill out the shear bolts - 1 - of the electronic steering column lock control module (J764) - 3 -.






• Bolts M8 - 1 -, core hole diameter 6.8 mm.

- Disconnect the connector on the back of the electronic steering column lock control module - 3 - and then remove the electronic steering column lock control module, together with the steering column switch mount - 2 -, from the steering column.

- Open the retainers - arrows - on the steering column switch mount and remove the mount - 1 - from the electronic steering column lock control module - 2 -.






Installing

- Install the steering column switch mount - 1 - on the electronic steering column lock control module (J764) - 2 - until it locks in place.






- Slide the steering column combination switch (E595) onto the steering column switch mount until it locks in place.

- Slide the pre-assembled unit of the electronic steering column lock control module, the steering column switch mount and the steering column combination switch straight onto the steering column all the way to the stop and align with respect to the threaded holes.

- Attach the electronic steering column lock control module to the steering column with new shear bolts - 1 -.






- Tighten the new shear bolts - 1 - until the bolt heads shear off.

- Install all components accordingly in the reverse order.

• Code the new electronic steering column lock control module after installing. Refer to => [ Electronic Steering Column Lock Control Module (J764), With KESSY, Coding ] Electronic Steering Column Lock Control Module (J764), With KESSY, Coding.