Wire Stripper (VAS 1978/3)

Wire Stripper (VAS 1978/3)

(VAS 1978/3) is used for professional stripping and cutting of wires.






The (VAS 1978/3) is a component of the Wiring harness repair kit (VAS 1978 B) and from the previous versions.

Wire stripper has an adjustable stop in its pliers-jaws which can be set to the desired length of wire insulation to be removed.

Stripping

- Set the slideable stop in pliers-jaws to the desired length dimension to be stripped.

- Insert wire end from front up to stop into jaws of pliers and squeeze the pliers completely.






- Open pliers again and remove the stripped wire end.

- If necessary, cut wires using side-cutter function on the top of the wire stripper.