M45/46

1801 Standard Handle:

Standard handle, Part Number 1801
Drift, installing bell housing seal, Part Number 2867

2261 Puller:

Puller, drive flange, Part Number 2261

2412 Drift:

Drift, installing input shaft bearing, Part Number 2412

2413 Drift:

Drift, removing/installing rear cover seal, Part Number 2413

2520 Stand:

Stand, Part Number 2520
Fixture, attaching transmission to stand P/N 2520, Part Number 5130

2831 Press Tool:

Press tool, installing main shaft bearing, Part Number 2831

2952 Adapter:

Adapter, installing gear and synchro ring, Part Number 2852

2853 Adapter:

Adapter, removing gear and synchro ring, Part Number 2853

2985 Adapter:

Adapter, removing main shaft bearing, Part Number 2985
Tool, removing main shaft bearing, Part Number 5058
Tool, removing main shaft bearing,used with 5058, Part Number 5147
Tool, removing main shaft bearing on M46, Part Number 5148

2986 Drift:

Drift, installing intermediate shaft bearings, Part Number 2986

5064 Drift:

Drift, installing rear cover seal, Part Number 5064

5065 Drift:

Drift, installing seal on shift selector rail, Part Number 5065

5069 Puller:

Puller, removing rear seal, Part Number 5069

5111 Centering Drift:

Centering drift, installing clutch, Part Number 5111

5131 Puller:

Puller, removing intermediate shaft bearing, Part Number 5131

5149 Wrench:

Wrench, removing/installing flange nut, Part Number 5149

5177 Puller:

Puller, intermediate shaft bearing, aluminum housing, Part Number 5177

5972 Fixture:

Drift, intermediate shaft bearing, aluminum housing, Part Number 5180

5181 Pliers:

Pliers, removing pin on gearshift lever, Part Number 5181

5972 Fixture:

Fixture, removing transmission, Part Number 5972