M45/46
1801 Standard Handle:
Standard handle, Part Number 1801
Drift, installing bell housing seal, Part Number 2867
2261 Puller:
Puller, drive flange, Part Number 2261
2412 Drift:
Drift, installing input shaft bearing, Part Number 2412
2413 Drift:
Drift, removing/installing rear cover seal, Part Number 2413
2520 Stand:
Stand, Part Number 2520
Fixture, attaching transmission to stand P/N 2520, Part Number 5130
2831 Press Tool:
Press tool, installing main shaft bearing, Part Number 2831
2952 Adapter:
Adapter, installing gear and synchro ring, Part Number 2852
2853 Adapter:
Adapter, removing gear and synchro ring, Part Number 2853
2985 Adapter:
Adapter, removing main shaft bearing, Part Number 2985
Tool, removing main shaft bearing, Part Number 5058
Tool, removing main shaft bearing,used with 5058, Part Number 5147
Tool, removing main shaft bearing on M46, Part Number 5148
2986 Drift:
Drift, installing intermediate shaft bearings, Part Number 2986
5064 Drift:
Drift, installing rear cover seal, Part Number 5064
5065 Drift:
Drift, installing seal on shift selector rail, Part Number 5065
5069 Puller:
Puller, removing rear seal, Part Number 5069
5111 Centering Drift:
Centering drift, installing clutch, Part Number 5111
5131 Puller:
Puller, removing intermediate shaft bearing, Part Number 5131
5149 Wrench:
Wrench, removing/installing flange nut, Part Number 5149
5177 Puller:
Puller, intermediate shaft bearing, aluminum housing, Part Number 5177
5972 Fixture:
Drift, intermediate shaft bearing, aluminum housing, Part Number 5180
5181 Pliers:
Pliers, removing pin on gearshift lever, Part Number 5181
5972 Fixture:
Fixture, removing transmission, Part Number 5972