Installation
P8
Install:
- new gasket around evaporator.
- the evaporator itself.
- cover.
P9
Install expansion valve.
P10
Connect coolant hoses:
- Use new 0-rings. Coat them with compressor oil.
- Tighten to 30 Nm (22 ft.lb).
- Replace accumulator.
- Fill system with coolant and test for leaks.
P11
Insulate hoses and screw fittings.
Note: Do not insulate expansion valve.
P12
Install:
- defroster vent.
- air duct.
- glove compartment.
- panels.