Transmission and Drivetrain: Tools and Equipment
Part Number, Description And Application:5207 Drift:
1426 Drift: For fitting the pilot bearing
1801 Standard Shank:
1801 Standard shank: For drifts
2261 Puller:
2261 Puller: For the coupling flange
2412 Drift:
2412 Drift: For fitting the seal between coupling flange of M46 and toothed wheel (ETC)
2520 Stand:
2520 Stand: For securing the ZF, together with fixture 5288
2531 Pressure Gauge:
2531 Pressure gauge: For measuring the line pressure in the AW70/71 and ZF
2709 Puller:
2709 Puller: For removing the overdrive
2714 Fixture:
2714 Fixture: For rear axle. Used together with the hoist for removing and refitting the rear axle
2806 Drift:
2806 Drift: For the seal at the coupling flange
2834 Oil Pressure Gauge:
2834 Oil pressure gauge: For measuring the oil pressure on the M46
2836 Socket:
2836 Socket: For removing/refitting the plug for the non-return valve of the M 46
5207 Drift:
4090 Puller: For removing the pilot bearing
5006 Engine Support:
5006 Engine support: For removing the transmission from the B200/230
5010 Ring:
5010 Ring: For fitting the bearing and lock ring onto the drive shaft
5064 Drift:
5064 Drift: For fitting the seal for the coupling flange of the M 47
5069 Puller:
5069 Puller: For removing the oil pump seal on the AW70/71
5071 Puller:
5071 Puller: For removing the oil pump on the AW70/71
2531 Pressure Gauge:
5074 Adapter: For pressure gauge 2531 and AW70/71
5075 Drift:
5075 Drift: For fitting the coupling flange seal to the AW70/71
5076 Holder:
5076 Holder: For removing and refitting the valve body on the AW70/71
5080 Drift:
5080 Drift: For fitting the tab washer to the coupling flange of the ZF transmission
5085 Drift:
5085 Drift: For fitting the front protective ring for the centre support bearing of the propeller shaft
5085 Drift:
5087 Drift: For fitting the front protective ring for the centre Support bearing of the propeller shaft
5111 Drift:
5111 Drift: For centering the clutch
5114 Pressure Gauge:
5114 Pressure gauge: For measuring the governor pressure on the AW7O/71
5080 Drift:
5117 Drift: For fitting the seal to the output shaft and oil pump of the ZF
5118 Drift:
5118 Drift: For fitting the seal for the selector shaft of the AW7O/71
5149 Spanner:
5149 Spanner: For removing the coupling flange
5154 Bench Mounting:
5154 Bench mounting: For securing the ZF by means of 5288
5156 Press Tool:
5156 Press tool: For fitting the coupling flange, etc.
5172 Claw Spanner:
5172 Claw spanner: For removing/fitting the solenoid on the M 46
5183 Plug Spanner:
5183 Plug spanner: For removing/refitting the relief valve plug on the M46
5111 Drift:
5203 Drift: For centering the clutch
5207 Drift:
5207 Drift: For fitting the pilot bearing
5212 Press Tool:
5212 Press tool: For replacing the drive shaft bearing
5225 Drift:
5225 Drift: For pressing the engine mounting bush in and out (B 28)
5241 Guide Pins:
5241 Guide pins: For changing the oil pump 0-rings of the AW7OI7i
5242 Drift:
5242 Drift: For pressing-in the centre 5uppOrt bearing for the propeller shaft
5243 Drift:
5243 Drift: For fitting the centre support bearing for the propeller shaft and for fitting the inner seal for the axle shaft (5009 for ETC)
5244 Sleeve:
5244 Sleeve: For removing/fitting the propeller shaft
5250 Sleeve:
5250 Sleeve: For removing/fitting the reversing light switch
5278 Gauge:
5278 Gauge: For adjusting the valve body
5279 Drift:
5279 Drift: For fitting the kick-down cable to the ZF
5287 Adapter:
5287 Adapter: For pressure gauge 2531 and ZF
5288 Fixture: For securing the ZF transmission
5876 Bleeding Unit:
5876 Bleeding unit: For bleeding the clutch cylinder
7693 Puller:
7693 Puller: For removing the 5th gear case on the M47
5792 Fixture:
5972 Fixture: For removing/fitting the gearbox
9177 Torque Meter:
9177 Torque meter: For checking the damper and pinion bearing preload