Windshield Washer Reservoir: Service and Repair

H5

Washer reservoir, Replacement





- Remove air cleaner.

- Remove sensor.

- Disconnect leads from pump and remove hose. 5-door models have 2 pumps.

- Cut off lead tie and raise top-up tube.

- Lift away reservoir.

- If the pump is working satisfactorily transfer it to the new reservoir, as per H1. Service and Repair

- Replace reservoir if it is damaged. Otherwise rinse it out, clean and fit a new top-up filter.

- Reassemble in reverse order:
• Some top-up tubes have a small triangular mark at the top which should be located rearwards.

- Fit new lead tie.

- Fill reservoir with fluid. Check for leaks and test.