Pinion Seal - Revised And Installation
SECTION4
GROUP
46
NO.
204
DATE
February 1994
RE: Installation of pinion seal
200 All
REFERENCE: TP11556/2; 3/85; REAR AXEL 240, 260 1975-
INSTALLATION OF PINION SEAL
A new special tool has been developed to improve the installation of the final drive pinion seal. A new seal which encloses the spring more fully has also been introduced as a replacement, P/N 943317-7, replacing the earlier type.
The new special tool is a drift, 999 5538-7. The tool is designed for use in combination with press tool 999 1845-0 (for inch threads). 999 5156-8 (for M20 thread, up to 1991) or 999 5504-9 (for M24 thread, 1992 on). and can be used for all final drives.
AMENDMENTS TO SERVICE MANUAL:
A number of amendments must be made and two new illustrations inserted in the above manual.
Please cut and paste pages 2, 3 and 4 of this bulletin in the appropriate places in the manual.
On completion of the amendments, file this page of the bulletin in the binder and discard pages 2, 3 and 4.
Page 2 - Print, Cut, and Paste
Page 3 - Print, Cut, and Paste
Page 4 - Print, Cut, and Paste