Oil System, Cleaning

- Place container under rear oil pipe (return pipe). Disconnect pipe from gearbox.
- Overfill transmission with approx. 0.3 L of fluid.

CAUTION: Use correct grade of fluid.

- Start engine and allow to idle. Collect contaminated or burnt fluid from return pipe.
- Stop engine when clean fluid emerges from pipe. Reconnect pipe.
- Check fluid level. Refer to "Checking Fluid". Testing and Inspection

Oil System Diagram:

Extra Oil Cooler (cleaned Separately)
Undo connections between ordinary cooler and extra cooler. Connect extra cooler to oil filler pump and pump clean fluid through unit. Remake connections with ordinary cooler. Check for leaks.

Oil System With Oil Cooler: