Operation CHARM: Car repair manuals for everyone.

Tools - New and Modified

No.
33

Date:
May 1988

THIS BULLETIN APPLIES TO THE U.S. AND CANADIAN MARKETS

NEW AND MODIFIED SPECIAL TOOLS

Part Numbers:
9995356-4 Category: Mandatory
9995359-8 Category: Available





9995356-4 Drift

For installing front wheel bearing seals on 740/760 and 780 up to 1987, models.

* 53 56 replaces drift 5005





9995359-8 Drift

For installing inlet valve seats on B280F engines.





A new type of control arm bushing has been used on 240/260 models. Previously the drilled hole was positioned 2 mm off center, now it is in the center of the bushing.

After carrying out the modification, it will be possible to use special tool 5078 for replacing early and late type bushings.





Increase size of hole in drifts "C" and "D" to 14.5 x 16.5 mm.





Increase size of hole in drift "A" to 30.5 x 32.5 mm. Use a file.