Battery Ground Cable - New Routing
90volvo09
MODEL GROUP NUMBER
700 37 702
TITLE
BATTERY GROUND CABLE
MARKET DATE
US and Canada November 1990
REFERENCE: TP 31166/2 (ENGLISH); 11/88; ELECTRICAL: WIRING This bulletin supersedes SB 37-702, December 1989.
Battery ground cable - new routing
Should it ever become necessary to replace the battery ground cable for a naturally-aspirated four-cylinder engine, install a new ground cable and re-route it using the following procedure.
REQUIRED Descriptign Part No. Quantity
PARTS:
battery cable, B230F 3544123-7 1
battery cable, B234FS 3544189-8 1
PROCEDURE
Remove/disconnect:
- battery gr-ound cable (1)
- clip securing positive and negative cables (2)
- small cable from member (3)
- pre-heater hose (4). Place hose to one side.
- pre-heater hose brackets (5).
Remove/disconnect:
- splashguard under engine
- battery ground cable terminal screw at engine
- round cable terminal from ground cable
Support new ground cable and bracket from member.
Run new ground cable behind servo pump hoses.
Pull original ground cable out of sleeve.
Re-secure light cable to member.
Connect ground cable to battery.
Clamp cable at yellow mark.
Re-apply anti-corrosive grease to battery terminals as needed.
During the New Car Warranty period, claims must be submitted under:
Oper. No. Labor Description Time Allowance
371 652 Battery ground cable, replace 0.3 hr.