General Camshaft Specifications
Marking [1]: MMax lift height:
Intake 9.5 mm (0.374 in)
Exhaust 10.5 mm (0.413 in)
Check values [2] [3]:
Intake:
Valve clearance 0.7 mm (0.028 in)
Valve should open at 6°ATDC
Exhaust:
Valve clearance 0.7 mm (0.028 in)
Intake Valve should open at 44°BBDC
Number of bearings 5
Bearing journal diameter 29.950-29.970 mm (1.1791-1.1799 in)
Bearing diameter 30.000-30.021 mm (1.1811-1.1819 in)
Radial clearance:
new 0.030-0.071 mm (0.0012-0.0028 in)
max. 0.15 mm (0.006 in)
Axial clearance 0.1-0.4 mm (0.004-0.016 in)
___________________________________
[1]: Camshaft is marked with a letter on rear end.
[2]: cold engine.
[3]: ATDC = after top dead center, BBDC = before bottom dead center.