Operation CHARM: Car repair manuals for everyone.

Starts, But Stalls


Engine starts but stalls when load is placed on the engine (A/C clutch engaged or transmission shifted into drive or reverse).

POSSIBLE CAUSE ACTION


EGR malfunction Check EGR system in "Testing
flange gasket leaking, Procedures" in Emissions
solenoid valve malfunctioning,
valve sticking



Hot air tube not connected Check inlet air temperature system (TAC)
to air cleaner - air damper in "Testing Procedures" in Emissions
door binding or not opening



Ignition timing Check Ignition Timing in "Adjustment
Procedures" in Emissions



Idle speed too low Check idle speed
in "Adjustment Procedure" in Emissions



Poor or contaminated fuel Recommend higher grade fuel