30000 MI or 48000 KM
LubricateDrive Belt Tensioner
Reset
Service Reminder Indicators
Service Indicator Reminder Lamp (SIR); 1996 Models must use a Scan Tool to reset SIR
Clean
Antenna
Check
Cooling System
Pressure test cooling system.
Brakes and Traction Control
Check thickness of pads & linings, check condition of hoses & lines, check power booster, check parking brake cables & adjust.
Tighten/Torque
Turbocharger
Turbo To Exhaust Nuts.
Adjust
Valve Clearance
4 cylinder engines ONLY.
Throttle Valve Cable/Linkage, A/T
Clutch Pedal Assembly
Clutch Pedal Free Play.
Inspect
Wiper and Washer Systems
Universal Joint, Drive/Propeller Shaft
Steering and Suspension
Power Steering Fluid
Lighting and Horns
Fuel Supply Line
Fluid - M/T
Fluid - Differential
Fluid - A/T
Exhaust System
Brake Fluid
Battery
Accessories and Optional Equipment
Replace
Timing Belt
�1m1993 960�0m w/B6304F; Lubricate belt tensioner; Do not exceed by more than 2500 miles. �1m1992 960�0m w/B6304F- only after installation of Torsion Damper; Lubricate belt tensioner. Do not exceed by more than 2500 miles. Inspect for label on timing belt cover indicating that Torsion Dampener is installed, if so service at 48K km (30K miles). �1mImportant Note:�0m A Torsion Damper on the exhaust camshaft has been introduced on the �1m1993�0m model year 960 with B6304F engine to extend the replacement interval of the timing belt to 30,000 mile intervals. For a �1m1992�0m model year 960 an exhaust camshaft damper will be installed in conjunction with the the timing belt replacement at the 40,000 mile service. If the torsion damper has not been installed it is highly recommended to have one installed which will change the replacement interval from 20,000 miles to a 30,000 mile interval.
Spark Plug
1992 240 - 10K Mile interval for vehicles used under severe conditions; 1993 240, 740, 850, 940, 960 - 15K Mile interval for vehicles used under severe conditions.
Oil Filter, Engine
Engine Oil
Coolant
Rotate
Tires
Check pressure, tread depth and wear pattern.