Power Seat Control Module: Service and Repair

Control module for power seat, change

Remove:

Preparations
- Remove battery negative lead and note any radio code.
- Remove seat from vehicle. Remove Seat From Vehicle




Connector
- Disconnect all 4 control module connectors.




Remove control module
- Unhook control module fixing plate at front edge.
- Lift fixing plate clear at front edge and remove control module.


Replace:




Replacement of control module
- Replace control module.
- Replace fixing plate at front edge.
- Replace the 4 connectors. Check that connectors are properly connected.

Replacement
- Replace seat in vehicle. Remove Seat From Vehicle
- Replace battery negative lead.




Check
- Calibrate seat.
- Check function.