Rear Knock Sensor

REAR KNOCK SENSOR REPLACEMENT

Removal of Starter Motor
^ Remove starter motor and oil dipstick pipe.

Removal of Knock Sensor
^ Remove:
- Connector from Knock Sensor.
- Knock Sensor.

Installation of Knock Sensor
^ Fit:
- Knock Sensor and tighten.
- Connector on Knock Sensor.

Tightening torque 20 Nm (15 ft lb).

NOTE: Rear Knock Sensor should be tightened in the 9 o'clock position.

Installation of Starter Motor
^ Fit starter motor and oil dipstick pipe.