Bendix

REMOVAL
1. Turn ignition OFF.
2. Remove the fuel filler cap to prevent a vacuum in tank when replacing filter.
3. Have a fuel resistant container ready to catch any excess fuel.

WARNING: Fuel lines are under pressure. Fuel may spray from loose connection until pressure is relieved.

4. Cover the outlet connection of fuel filter with a shop towel to protect your face from fuel. Loosen the connection to relieve the fuel pressure, then remove bolt. Some fuel will run out of hose and filter until empty.
5. Remove the banjo bolt from inlet side of fuel filter.
6. Remove the fuel filter.

INSTALLATION
1. Reinstall new fuel filter.

CAUTION: Install filter in direction of fuel flow. Check the marking on the filter.

2. Reconnect fuel lines using new gaskets.
3. Reinstall fuel filler cap.
4. Start engine and check for leaks at the filter.