Rear Door

1. The holes that are marked (1) should be sealed with sealant cover P/N 9170187-0.

2. The holes marked (2) should be filed into a square shape. Use plastic nut P/N 9132846-8 as a template.

3. The holes marked (3) should be filed into a square shape. Use clip P/N 3511468-5 as a template.

4. Punch marks on (4). Drill a square 9 x 9 mm (23/64" x 23/64") hole for box nut P/N 946947-9.

5. A rubber plug should replace grommet P/N 1259852-0 at (5).