Timing Marks

Caution: Incorrect removal or installation of the timing belt can result in damage to internal engine components.

For complete procedures refer to Timing Belt : Service and Repair : Replacing the Timing Belt/Idler Pulley/Belt Tensioner Service and Repair

CAUTION! Do not rotate crankshaft or camshaft with timing belt removed. Pistons and/or valve damage can occur.





Note: Make sure that rear upper timing cover is in place and that the alignment mark on it has not been broken off.


Note: If camshaft gears have been removed, special tools must be use to properly set engine timing. (Crankshaft Locking Tool - 999 5451 & Camshaft Locking Tool - 999 5452) For complete procedures refer to Cylinder Head Assembly : Service and Repair : Cylinder Head Removal and Installation Service and Repair