Gear Selector Solenoid

1. Remove gear selector housing and gear lever.
2. Move gear selector lever to Park position and disconnect P-shift lock solenoid latch.
3. Remove P-shift lock solenoid from gear selector housing.
4. Using suitable pliers, release clip securing P-shift lock solenoid.
5. Reverse procedure to install, noting the following:
a. Move gear selector to Park position, then place bottom edge of P-shift lock solenoid into slot position.
b. Press solenoid rearward until upper edge snaps into position.
c. Check gear selector lever movement. Adjust as described under ``Gear Selector Lever, Adjust.''