Nippondenso 14V 100 A
NipponDenso 14V 100 AA low range ohm-meter should be used.
| Max. current | 100 Ampere (A) | |
| Max. output | 1400 Watts (W) | |
| Max. speed | 18000 Revolutions Per Minute (rpm) | |
| Slip ring diameter | New | 14.4 Millimeter (mm) |
| Minimum | 12.8 Millimeter (mm) | |
| Brush Spring Force | Max. | 3.23 Newton (N) |
| Min. | 1.37 Newton (N) | |
| Brush Length | 5.5 Millimeter (mm) | |
| Tightening Torque | Mounting Screws | 4.5 Newton Meter (Nm) |
| Pulley Nut | 115 Newton Meter (Nm) 85 (ft. lbs) | |
| Resistance Test | Rotor Winding | 2.3 Ohms (ohms) +/- 10 |
| Stator Winding | 0.03 Ohms (ohms) +/- 10 | |
| Amperage Rpms (A at r/s) | 55/3.33 | 13.5 at 2000 Volts At RPM (V @ rpm) |
| 100/83 | 13.5 at 5000 Volts At RPM (V @ rpm) | |
| 108/100 | 13.5 at 6000 Volts At RPM (V @ rpm) |