Replacing Diode Bridge
4Removing diode bridge
Remove:
- mode selector (1) from top panel.
- cut clips (2) and remove gear selector indicator locking sleeves on the gear selector assembly.
- diode bridge (4) from top panel.
separate shift-lock solenoid and gear selector indicator connector (5).
Open wiring and remove diode bridge and gear selector indicator connector (6). Remove diode bridge and gear selector indicator.
5
Installing diode bridge
Install diode bridge (4) on top panel with clips.
Note!
Ensure that the indicator foil is in position in the top panel.
Install the gear selector indicator (3) with spacer sleeves and retaining clips(2) on the gear selector assembly
Connect wiring to connectors.
Install mode selector (1) on top panel.
Connect mode selector connector.
Install center console, see step 10.