Body - Drilling Holes for Trim in Rear Fender
SECTION8
GROUP
81
NO
916
DATE
Nov.1996
Drilling holes for the trim strip in the rear fender
Background: There are no holes in 945 and 965 replacement part rear fenders for mounting the trim strip above the rear bumper.
Drilling holes
- Measure up and drill holes (dimensions as illustrated) when installing the rear fender. Use a 9 mm (11/32") drill.
- Prime and spray.
Measurements for the left rear fender trim are in millimeters.
Measurements for the right rear tender trim are in millimeters
mm inch
540 21-1/4"
410 16-1/8"
280 11"
150 5-7/8"
20 25/32"
12.5 15/32"
9 11/32"