Compressor Clutch

TTTO27 Checking clearance







- Check clearance between coupling plate and pulley using a feeler gauge:
- clearance should be between 0.3 and 0.5 mm (0.012 in and 0.020 in).
- 0.3 mm (0.012 in) clearance all the way round
- 0.6 mm (0.024 in) should not go in anywhere

- If clearance is not within the stated values; Replace shims. The following dimensions are available:
- 0.2 mm (0.008 in)
- 0.3 mm (0.012 in)
- 1.0 mm (0.039 in)