Replacing the Oil Pressure Sensor
Replacing the oil pressure sensor
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information is always correct.
Removing the oil pressure sensor
Remove the hose from the charge air pipe.
Remove:
- the screw for the charge air pipe in the cylinder block
- the connector from the oil pressure sensor
- the oil pressure sensor. Use a long 24 mm socket.
Place paper underneath in case of oil leakage.
Installing the oil pressure sensor
Install:
- the new pressure sensor
- the connector
- the screw for the charge air pipe in the cylinder block
- the hose on the charge air pipe.