Operation CHARM: Car repair manuals for everyone.
Home >> Volvo >> 2003 >> S80 T6 L6-2.9L Turbo VIN 91 B6294T >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Diagrams >> Diagnostic Aids >> Cavity Opening Has Two Extraction Grooves
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cavity Opening Has Two Extraction Grooves






When the cavity opening has two extraction grooves

Terminal removal tool, P/N 9814228




Use pointed, pincer type terminal removal tool, P/N 9814228.
This terminal removal tool is used for cable terminals with two locking tabs:




A 2.8 Flat pin steel sws




B 2.8 Timer and 2.8 Timer sws




C 6.3 Timer

Choose the terminal removal tool with the correct width




There are two sizes of cavity opening.
See the example in the illustration.
Select the terminal removal tool with ends which match the extraction groove in the cavity opening.
- The narrow ends are 0.9 mm wide.
- The broader ends are 1.6 mm wide.
Press the cable terminal in the cavity forwards as far as it will go. This will free the locking tab from the cavity catch.
Insert the terminal removal tool in the groove over and under the cable terminal. Extract the cable terminal.
Always follow the instructions in Using terminal removal tools Using Terminal Removal Tools. These instructions give the correct working procedure.
- Proceed to chapter for New cable terminal New Cable Terminal Seal sws and plug instructions about how to crimp a new cable terminal.

pro multis · About Operation CHARM