Replacing Warning Lamp Switch

Replacing Warning Lamp Switch







- Remove the knobs from the heater control; insert a small screwdriver at the rear edge under each knob.
- Remove the heater control panel (insert two fingers into the opening and carefully pull out the control panel).
- Remove the two upper mounting screws (torx) for the heater control panel.







Carefully pry out the ventilation vents with a small screwdriver.







- Press the catches on the panel downwards from the inside using a screwdriver. Pull the panel forward slightly.
- Press in the two retaining clips on the switch. Pull the switch out backwards.
- Disconnect the connector.

Reinstall the components in reverse order.