Operation CHARM: Car repair manuals for everyone.
Home >> Volvo >> 2003 >> V40 L4-1.9L Turbo VIN 27 B4204T4 >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Programming and Relearning >> Programming A New Control Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming A New Control Module






Programming a new control module

Ordering software
PIN codes must be programmed into the control module after a new EMS2000 engine control module (ECM) has been installed in the car. The PIN codes are retrieved from the Volvo central database.
The new control module must be installed in the car before this programming is carried out. The malfunction indicator lamp (MIL) will flash on a new control module until the programming is complete.

Note! A new control module which is installed and programmed in a car is adapted for that particular car only. The engine control module (ECM) must not be moved to another car.

Order and download appropriate software.

Continue - Programming engine control modules (ECMs)

-------------------------------------------------

Programming engine control modules (ECMs)

Caution! Programming can take place when the software is available.

Program the engine control module (ECM) for S/V 40 according to 9139873.

Continue - DONE

-------------------------------------------------

pro multis · About Operation CHARM